Webinar Archive

Check out our past webinars below, or click to view our upcoming events!

SEE UPCOMING WEBINARS

1 PDH UNITFan Troubleshooting Original Webinar Date: 11/08/17

You just installed your recently purchased fan or, have had one in operations for years and it isn’t performing as expected. What key items should you examine and what can you do to get your fan working properly again? Learn what issues can arise and how to determine your next actions.

1 PDH UNITEthics for Engineers Original Webinar Date: 10/25/17

Standards of Professional Conduct have been developed to provide individuals or small businesses with guidelines to govern the day-to-day aspects of ethics practices in our profession. Using the ASCE’s Code of Ethics as a basis, we will exam and discuss the guidelines for ethical practice within the engineering field.

1 PDH UNITScrubber Troubleshooting Original Webinar Date: 06/27/17

You just installed your recently purchased scrubber or, have had one in operations for years and it isn’t performing as expected. What key items should you examine and what can you do to get your scrubber working properly again? Learn what issues can arise and how to determine your next actions.

1 PDH UNITScrubber Chemistry Original Webinar Date: 05/31/17

Wet scrubbing is an effective means of air pollution control for many chemical pollutants. However, since each chemical has varying properties, it is important to understand the underlying chemical principles in order to optimize scrubber performance. The upcoming Verantis webinar will review these basic principles and how they relate to wet scrubber design.

1 PDH UNITDemisters - What and Why? Original Webinar Date: 02/22/17

Demisters or mist eliminators are devices used to filter liquid droplets that are being carried in an air or gas stream. The type of demister required depends on the size of the droplets to be removed and the overall efficiency required. As with any type of air filter, higher efficiency demister designs typically have higher pressure drop and are more susceptible to fouling. Learn what type of demister is best for your application.

1 PDH UNITFan Selection Basics Original Webinar Date: 1/25/2017

There are many different factors that have an effect on selecting the right fan. The main influences on fan selection are operating conditions and general fan environment.

1 PDH UNITFan Installation and Maintenance Original Webinar Date: 10/26/16

Your FRP fan/blower has now been delivered and is on-site. What are the best practice steps for Start Up and Installation? After installation, how do you maintain your fan properly for best performance and longevity? Watch this informative webinar that can help you answer these important questions! Valid for One PDH credit for Professional Engineers!

1 PDH UNITSystem Effects & Design Original Webinar Date: 9/28/2016

When designing buildings and air systems, the emphasis must be on minimizing System Effects rather than simply identifying and accounting for them, especially for inlet and outlet conditions which adversely affect fan performance. System Effect is a common term used in the air moving industry to describe the energy or pressure increase in an air system as air flows through the elements. One PDH unit is available for Professional Engineers.

1 PDH UNITAir Pollution Abatement Technology Overview Original Webinar Date: 9/15/16

This free webcast will provide you with a general overview of industrial emission control technologies and the pollutants they target, PLUS, you'll earn continuing education credits for attending! Through the use of case studies, your presenters will cover destruction capabilities, operating costs and limitations of the various technologies.

1 PDH UNITPacked Tower Design Original Webinar Date: 6/22/16

Designing a randomly packed tower is a subtle blend of art and science. Packed columns are most frequently used to remove contaminants from a gas stream (absorption). However, packed columns can also be used to remove volatile components from a liquid stream by contacting it with an inert gas (stripping). In this webinar, you will learn about Packed Tower Design including determination of tower diameter, selection for water absorption systems as well as other design considerations. This mid-level course is geared to professionals who have some basic understanding of mass transfer principles.

1 PDH UNITWhy FRP for Industrial Fans? Original Webinar Date: 5/25/16

What is FRP and why would you want to use it for industrial fan applications? Can't I just use a normal carbon steel fan? What applications make the most sense for FRP fabricated fans? This webinar will discuss fiberglass reinforced plastic (FRP) and how it can be used within industrial applications.

1 PDH UNITTower Packing Basics Original Webinar Date: 4/27/16

When it comes to scrubbing your exhaust gases, efficiency is important but so is pressure drop. It’s easy to forget the importance of Tower Packing when you are in the middle of designing full systems but without packing, your system will fail. This webinar will discuss the basics of mass transfer and how Tower Packing fits within the design of a complete scrubber system. This is an introductory course on tower packing and is geared to people that want a refresher or have never worked with tower packing in the past. It would also be beneficial for buyers, maintenance staff and other support personnel to help them understand packed tower principles.

1 PDH UNITFan Selection Basics Original Webinar Date: 2/24/16

There are many different factors that have an effect on selecting the right fan. The main influences on fan selection are operating conditions and general fan environment. Also, depending on the process condition, there are different types of impellers, materials selections and temperature considerations that need to be examined before choosing a fan that will be successful within an application.

High Efficiency Filtration Systems for Aerosol Emissions Original Webinar Date: 9/30/15

Aerosols are generally regarded as liquids or solid particulates that are less than about 1.5 microns in diameter and existing all the way down to about 0.2 microns. Verantis has proprietary aerosol collection systems that are well suited to the collection of such small aerosols at extremely high efficiencies and relatively low energy levels. The systems utilize a fibrous filtration medium to achieve collection mechanisms including impaction, interception and Brownian motion for capturing these small, aerosol emissions. Typical application for these systems include asphalt and building materials manufacturing, plastics manufacturing and the food processing industries. The webinar discussion will include an overview of the different aerosol collection system designs available as well as typical markets and applications for the equipment.

Fan Installation, Maintenance, Start Up and Monitoring – FRP Original Webinar Date: 6/24/15

Your FRP fan/blower has now been delivered and is on-site. What are the best practice steps for Start Up and Installation? After installation, how do you maintain your fan properly for best performance and longevity? What options are available for monitoring your fans performance? Watch this informative webinar that can help you answer these important questions!

How To Inspect Your FRP Emission Control Equipment Original Webinar Date: 5/20/15

Making sure your equipment is running properly and in good shape is critical for many companies as unplanned downtime can be quite costly. Please join us to learn what you need to inspect your FRP equipment. Learn the basics that will guide your inspection schedule and help you to make wise decisions during planned outages. Proper inspection and maintenance can help prevent catastrophic failures. Do you know what to look for?

The Tellerette Advantage – What are YOU Packing? Original Webinar Date: 6/18/14

If you’re not packing the original and only Tellerette® Tower Packing in your scrubber, then you’re not running as efficiently as you could be. Tellerettes® have a unique, patented toroidal helix design that makes them dramatically more efficient than conventional packing for mass transfer, heat transfer and particulate collection. Need to retrofit an existing tower for increased capacity or higher removal efficiency? We can handle that. Watch this webinar and see why Tellerettes packing is the only packing you should be using.

Why FRP and How to Make it Excel for Your Application? Original Webinar Date: 5/21/14

When considering corrosive air moving applications including digesters, roasters, precipitators, scrubbers, odor control, etc., a number of factors come into play including corrosion, static dissipation, service life, capital investment, and operating costs. Verantis’ industry-leading FRP fans are designed and constructed with these factors in mind. Watch this webinar to learn why FRP is the right choice for your application.

AMCA System Effects and Design Fans and Blowers Original Webinar Date: 5/29/14

When considering corrosive air moving applications including digesters, roasters, precipitators, scrubbers, odor control, etc., a number of factors come into play including corrosion, static dissipation, service life, capital investment, and operating costs. Verantis’ industry-leading FRP fans are designed and constructed with these factors in mind. Watch this webinar to learn why FRP is the right choice for your application.

Verantis Fan Selector Program Training Original Webinar Date: 5/22/13

The fan you need is just a few clicks away! The Verantis Fan Selector Program makes it fast and easy to size, select, and quote the right FRP fan for your job. All you need to get started is your operating conditions — volume and static pressure. The program will do the rest for you, instantly delivering custom fan recommendations along with all the information you need to choose and price your fan. This webinar will show the ins and outs of using this program for maximum effectiveness!

Top